Water purification information

What are the reasons for the pollution of pure water equipment?

Views : 78087
Update time : 2021-11-24 14:29:34
There are several explanations for the pollution of pure water equipment: the pure water source of this equipment is the effluent of urban tap water after ultrafiltration. The water quality is ideal, but some fungi reproduce by spores. Although municipal tap water has been chlorinated and disinfected before ultrafiltration, some fungal spores may be in a state of suspended animation and enter reverse osmosis. Reducing agent is added to the reverse osmosis inlet pipe to remove residual chlorine in the water. There is no oxidizing bactericide in the pipeline from the reverse osmosis feed water pump to the reverse osmosis outlet water, which creates good living conditions for other microorganisms such as anaerobic fungi, so that they can multiply rapidly in these parts.

The front-mounted safety filter of the pure water equipment is the filtering equipment before reverse osmosis, with a filtering accuracy of only 5m, which has a strong ability to intercept pollutants. When the intercepted material gathers together, it becomes an ideal environment for microorganisms to multiply. Other similar equipment also has many cases where foreign matter inside the safety filter affects the pure water equipment. Fungi-like substances enter the reverse osmosis body with the influent, and multiply inside the reverse osmosis, which affects the operation of the equipment.

1. Location selection of pure water equipment: The water softener must be placed on a firm level ground, and the distance from the drain is good. The distance from the boiler and other heat sources must be greater than 3m, and it is also forbidden to approach acidic liquids or gases. If additional water treatment equipment is needed, place should be reserved.

2. Regarding the location of the recovery salt tank and resin:

It should be placed as close to the exchange column as possible. In order to make full use of the salt solution, try to shorten the size of the salt-absorbing plastic tube.

3. About filling quartz sand and resin:

(1) To ensure uniform water distribution, try to spread 150~200mm high-quality quartz sand on the bottom of the exchange column.

Then fill with resin and check the length and suitability of the intermediate riser.

 
Related News
Read More >>
PP Filter Cartridge Selection and Replacement Precautions PP Filter Cartridge Selection and Replacement Precautions
Oct .24.2024
Most of the household water purifier or water purifier are used in the first level of the filter are PP filter, the first level of the filter will not only directly affect the water quality, will also affect the back of the three or four filtration effect and the life of the filter, so the quality of the PP filter for the water purifier is particularly important.
Do you know the types of PP filter element commonly used in water filtration and the filter effect of the filter element? Do you know the types of PP filter element commonly used in water filtration and the filter effect of the filter element?
Oct .24.2024
PP cartridge can remove a small amount of solid particles in the liquid or air can protect the normal operation of the equipment or clean air, when the fluid enters the cartridge with a certain specification of the filter, the impurities are blocked, and the clean flow through the cartridge outflow, the cartridge is mainly used for filtration.
Do water purifiers actually work? Does it work? Does it work? Do water purifiers actually work? Does it work? Does it work?
Oct .23.2024
Is a water purifier actually useful? Is it useful? Is it useful? Let me tell you, useful to burst!
Professionals also say that in our current drinking water environment, water purifier is a little hero:
Characteristics of Reverse Osmosis Membrane Heavy Contamination and Offline Cleaning? Characteristics of Reverse Osmosis Membrane Heavy Contamination and Offline Cleaning?
Oct .23.2024
Reverse osmosis system design will have a certain degree of surplus, to ensure that in the emergency time is not because of the reverse osmosis system of water production or desalination rate drop, reverse osmosis system differential pressure rise and make the water supply is not enough to cause a threat to the safety of the production, but in fact it is also because of the existence of these surplus makes the hidden faults are sometimes not able to show in time, so that ultimately may be evolved into reverse osmosis membrane Heavy contamination of reverse osmosis membrane elements.